PVC Press Vulcanizing Machine Sulfur Forming Machine for Small Laboratory

• After-sales Service: Supplied
• Certification: ISO
• Condition: New
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: GF-8122B
• Customized: Customized
• Automatic Grade: Automatic
• Structure: Vertical
• Transport Package: Seaworthy Package
• Specification: 120 (h) x 40 (w) x 35 cm (deep)
• Trademark: WIRECAN
• Origin: China
• Production Capacity: 500pieces/Month
• Package Size: 560.00cm * 260.00cm * 258.00cm
• Package Gross Weight: 35.000kg

Product Description

A PVC press vulcanizing machine, also known as a sulfur-forming machine, is used in the laboratory for small-scale production and research purposes. It is used to vulcanize rubber or plastic products by heating and pressing them under pressure with sulfur. The machine consists of a hydraulic press, heating plate, temperature control system, and mold.

The PVC press vulcanizing machine can be used to produce various products such as O-rings, seals, and gaskets. It is compact, easy to operate, and requires minimal maintenance.

Product description:

Suitable for rubber raw materials, plastic raw materials, paint, printing ink raw materials, chemical raw materials and other industries use.

 

Test method  is put in the mould in the square hole, the raw material sandwiched in between the electric heating plate of the machine, pressure and temperature, the material forming, for testing, as the basis of laboratory test and factory mass production ingredients.

Technical parameters

 capacity choice: 10/20/10/20 ton, choose a (standard: 20 ton).
 temperature: room temperature to 300 ºC, set arbitrary (upper die and lower die).
                        timers, electronic, 0 ~ 9999 minutes, set arbitrary.
 heating time: < 8 minutes, at 200 ºC, PVC granule (other materials, in accordance with the actual situation control).
the biggest pressure: about 250 kg/cm squared.
electric heating plate area: 210 x 220 mm (upper die and lower die).
Electric heating plate spacing: 0 ~ 100 mm (factory spacing: 45 mm).
mould square hole: 125 x 150 mm (special requirements, can be customized).
Mould thickness: 3.0/1.0/2.0 mm each 1 (special requirements, can be customized).
power supply: 1 30, AC220V, about 12 a.(heating current/power: upper and lower die, around 7 a / 2100 w).
machine size: about 120 (high) x 40 (width) x 35 cm (deep).
weight: about 280 kg.