A computer-controlled optical cable tension tester is a machine used for testing the tension of optical cables. It is equipped with a computer-controlled system that allows for accurate and precise testing of the tension of optical cables. The machine applies tension to the optical cable and measures the amount of force required to break or deform the cable. It can also measure the tension of the cable during installation or maintenance to ensure that it is within the required range. The computer-controlled system enables the user to set the tension parameters and record the results of the test. The data can be analyzed and used to improve the performance of the optical cable or identify any defects or weaknesses.
Main Technical Specifications:
1.
Product model: GLW-50/GLW-100
2.
Max load: 50kN/100kN
3.
Load measurement range: (1%~100%) F.S.
4.
Load resolution: ±250000 yard,no stepping, no change in full scale,resolution unchanged.
5.
Load accuracy: ±0.5%
6.
Load duration: ≥3 Hours, set arbitrarily
7.
Load hold accuracy: ±0.5%
8.
Deformation measurement gauge length: 1000mm
9.
Deformation measurement range: (0-50) mm
10.Deformation resolution: 0.001mm
11.
Deformation accuracy: ±0.5%
12.
Displacement resolution: 0.001mm
13.
Displacement control resolution: 0.000015mm
14.
Displacement accuracy: ±0.5%
15.
Displacement speed range: (0.01~500) mm/min,set arbitrarily
16.
Displacement speed accuracy: ±0.5%
17.
Tension space: 25m
18.
Distance of run: 1000mm
19.
Max diameter of clamping optical cable: 30mm
20.
Diameter of chuck: Determined by the national standard according to the diameter of optical cable sample.
21.
Equipment weight: 3500kg
Product configuration
1.
Servo drive and servo motor: Japan YASKAWA
2.
Load sensor: America Vishay
3.
Deformation measurement device: Shanghai Liangxing
4.
Reducer: Star reducer
5.
Wheel set: Shanghai Bairoe
6.
AEC-1200 controller: Shanghai Bairoe
7.
Industrial tablet computer
Installation requirements
1.
Host power supply: single phase, AC220V±10%, 50~60Hz, 2kW.
2.
Computer power supply: single phase, AC220V±10%, 50~60Hz, 0.5kW.
3.
Install onto a stable base, levelness≤0.2/1000, and room of more than 1 m around.
4.
Ambient temperature: 25ºC±10ºC, humidity: ≤80% non-condensing.
5.
No vibrating or corrosive media indoor.
){kind=link}