1.Application:
Cantilever type single cable stranding machine applied in the laying-up and stranding of power wire,telecommunications cable,control cable, CAT-5, CAT-6, CAT-7 date cable and other special core-wire,also can synchronously complete center wrapping or side wrapping.
2.Technical parameter for Cantilever Type Core Wire Cable Single twisting Machine:
cantilever type cable single stranding machine |
technical parameters |
|
machine type |
GF-630 |
GF-800 |
GF-1000 |
GF-1250 |
single wire diameter |
ø0.6-3.0mm |
ø0.6-4.0mm |
ø1.0-5.0mm |
ø1.0-5.0mm |
max stranding wire diameter |
ø15mm |
ø20mm |
ø25mm |
ø30mm |
stranding pitch |
10-180mm |
20-250mm |
30-350mm |
30-400mm |
pay-off reel specification |
ø400-500mm |
ø400-630mm |
take-off reel specification |
ø630 |
ø800 |
ø1000 |
ø1250 |
rotation speed |
1000rpm/min |
800rpm/min |
600rpm/min |
550rpm/min |
shaft lifting |
electric hydraulic lifting |
take-up tension |
pneumatic tension(adjustable) |
stranding direction |
SZ left and right free option |
traverse type |
take-up by self-running of wire drum,reciprocal traverse |
wrapping way |
center wind-wrapping or side straight-wrapping |
3.Features for Cantilever Type Core Wire Cable Single twisting Machine:
- High rotate speed, main shaft is lubricated by thin oil, cool warning if oil not enough, which can lower the temperature and the noise, extend the life of the machine.
- The wire goes from bow belt to idler pulley of main shaft directly, which can reduce scratch and keep round cross section.
- Magnetic powder clutch auto track and control taking up tension, making the tension of take up steadily.
- High production speed, constant tension from empty to full bobbin, especially for high quality stranding wire.
- Change guide wheel to change lay distance, easy to operate.
- Use synchronous belt drive,
4.Technical parameter:3. Machine main electric brand
Motor: Siemens (china) Motor
Transducer: American Emerson transducer
Temperature controller: Omron Brand PID Smart type
Man-Machine interface: 10.2 inch color
PLC and Control Module: Siemens
Screw and Barrel: Produced by jinhu Company.
Bearing: Japan NSK or other same quality brand
Low voltage electrical parts: Adopts SIEMENS, OMRON, brands,etc.