| Customization: | Available |
|---|---|
| After-sales Service: | Supplied |
| Warranty: | Supplied |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
A copper wire drawing machine with an annealer and coiler is a production line used to draw copper wire from a large diameter to a smaller diameter, while also annealing the wire to improve its ductility and reduce its hardness. The coiler is used to wind the drawn and annealed wire into a coil for storage and transportation.
The process begins with a spool of copper wire, which is loaded onto the drawing machine. The wire is then pulled through a series of dies, each with a smaller diameter than the previous one until the desired diameter is achieved. During this process, the wire is also passed through an annealing furnace to soften it and improve its ductility.
After the wire has been drawn and annealed, it is wound onto a coiler, which is typically a rotating drum or spool. The coiling process may also include a tensioning device to ensure that the wire is wound tightly and evenly onto the coil.
The final product is a coil of copper wire with a consistent diameter and improved ductility, which can be used in a wide range of applications such as electrical wiring, motors, and transformers.
| Machine type | GF-17DT | GF-17DST | GF-17MDST | GF-HST |
| Control system | Traditional analog type/digital control with a production record | |||
| Outlet diameter | Φ0.4~Φ1.2 | Φ0.4~Φ1.6 | Φ0.4~Φ1.2 | Φ0.4~Φ1.8 |
| Inlet diameter | Φ3.0~Φ2.6 | Φ3.5~Φ2.6 | Φ3.2~Φ2.6 | Φ3.5~Φ2.6 |
| Max line speed | 1200 | 2000 | 1500 | 1800 |
| Dies NO. | 17 | 17 | 17 | 17 |
| Slip ratio of m/c | 18%+12.5% | 20%+15% | 15%+10% | 19.5%+10% |
| Frame | Iron cast | Welded by steel plate | ||
| Capstan | Tungsten | |||
| Max capstan diameter | Φ260 | Φ250 | Φ254 | Φ280 |
| Fix speed capstan diameter | Φ260 | Φ250 | Φ252 | Φ280 |
| Spooler bobbin size | Φ400~Φ630 | |||
| Bobbin loading&unloading type | Double end thimble | |||
| Max loading capacity | 500KG/MAX | |||
| Transmission type | By chain | By precision ground gears | ||
| Traversing unit | 90KW strap speed-down motor type | |||
| Break | Magnetic brake/Disc brake | |||
| Revise system | PID synchronous control spooler | |||
| Detecting device | Weight balance by swing arm | |||
| Tension control | Air pressure adjust | |||
| Main motor | 37KW | 55KW | 37KW | 45KW |
| Spooler motor | 11KW | 11KW | 11KW | 11KW |
| Annealer method | Three-section annealing | |||
| Max anneal current | DC1200A | DC2000A | DC1500A | DC2000A |
| Max anneal voltage | DC50V | DC50V | DC50V | DC50V |
| Annealing motor power | 60KVA | 100KVA | 75KVA | 100KVA |
| Steam quantity | 12kg/h | 12kg/h | 12kg/h | 18kg/h |
| Cooling water capacity | 300L/min | 400L/min | 300L/min | 500L/min |
| The capacity of compressed air | 0.4~0.6mpa,30L/min | 0.4~0.6Mpa,50L/min | 0.4~0.6mpa,30L/min | 0.4~0.6Mpa,50L/min |
| Power source | 380V 50/60HZ | |||
| Machine size | 13300*3500*3400 | |||
| Machine weight | 6500KG | 7500KG | 6500KG | 6500KG |
){kind=link}